0verview:
The JB-QB-QM200/1 fire alarm control panel/agent releasing control panel is developed and manufactured by Shenzhen Fanhai Sanjiang Electronics Co., Ltd. As a fire alarm controller with a gas fire ectinguishing function, JB-QB-QM200/1 has some functions and characteristics in full compliance with the requirements of national standards Fire Alarm Control Units (GB4717-2005) and Automatic Control System for Fire Protection (GB16806-2006). The JB-QB-QM200/1 can be used with local manual/auto control box, an emergency start/stop control box, a horn/strobe, a release indicator, an agent drop display panel, a starting air cylinder, an extinguishant cylinder set and some other neccessary items to form a complete alarm and gas fire extinguishing control system.
The JB-QB-QM200/1 is mainly applied to pipe network type or non-pipe network type high/low pressure CO2 fire extinguishing system, FM200 (heptafluoropropane) fire extinguishing system, foam fire extinguishing system, gas-aerosol fire extinguishing system, IG541 (INERJEN) gas fire extinguishing system and other fire extinguishing systems using Halon alternatives (haloalkane). It can be mounted with a common switching value detector to realize fire detection and alarm, and its internal relay can control gas fire extinguishers as well as relevant alarm devices and linkages directly. It is extensively applied in places like computer rooms, reference rooms, switchboard rooms, transformer rooms, communication base stations, etc.
Multi-area Agent Releasing Control System includes JB-QB-QM200/n (n=2-4)
Agent Releasing Control Panel (hereinafter briefed as JB-QB-QM200/4 or the control panel, with JB-QB-QM200/4 agent releasing control panel as the main) and agent releasing device, HFC-227ea heptafluoropropane (hereinafter briefed as HFC-227ea) agent, smoke detector (JTY-GD-01K), alarm bell (or fire alerm sounder, hereinafter alarm bell represent), etc. It is applicable to fully put out electical fire, liquid fire or fusible soild fire, fire on soild surface and gas fire. It can be used safely and effectively in most places, such as the computer room, power distribution room, precise instrument room, generator room, oil deport, chemical flammable materials warehouse and stack room, file room, cashbox, etc.
Installation Instructions
Technical specification:
JB-QB-QM200/1
1. AC input voltage: AC220V±20%, 50Hz
AC input power: ≤120W
DC stanby power: DC24V 7.0Ah (consisting of two fully sealed maintanance-free DC12V 7.0Ah storage batteries conneted in series)
2. Output current of the DC24V power supply:
Long time: 6A
Transient (shorter than 3s): 8A
3. Operating environment:
Temperature:-10ºC~+50ºC
Humidity:≤95%RH (40ºC, without condensation)
4. Capacity:
Number of the detector circuits: Two, connected with common heat fire detectors and smoke fire detectors.
Number of the detectors allowed for each detector circuits: ≤20 (common detectors)
5. Wiring system of the detector circuits: two-wire system
6. Length of detector circuit: ≤1000m
7. Fire alarming threshold voltage of the circuit: ≤9.1V
Circuit fault threshold: ≥21.3V (mains voltage: 24V)
Alarming output current of the circuit: ≤8mA (mains voltage: 24V)
8. Capacity of the relay contacts: 7A/24V DC for each relay
9. Current limits of output circuits:
Output circuit driven by an electromagnetic valve: ≤3A
Output circuit driven by another kind of device: ≤1A
FAQ
JB-QB-QM200/2, 4
Main technical parameters for the control panel
|
Mains supply
|
230VAC (-15%, +10%). 47 ~ 63Hz. Max current 0.8A
|
|
Mains fuse
|
T3.15AL250V
|
|
Operating voltage
|
18.5 ~ 30VDC
|
|
Recommended mains cable
|
Screened or standard/black mains cable, cable size 0.75mm2
|
|
Power rating
|
Imax.a=1.2A; Imax.b=2.6A; Imin=0.65A
|
|
Max. charging current
|
1.2A
|
|
Max. battery supply current
|
4A (when the Mains is disconnected)
|
|
Battery capacity, type and
recommended model
|
Max. capacity 2×12V/17Ah; Min. capacity 2×12V/12Ah
VRLA. PS-12170 for 17Ah (Power-sonic), PS12120 for 12Ah
(Power-sonic)
|
|
Max. internal resistance of battery
|
1.5Ω
|
|
Battery fuse
|
F8AL250V
|
|
Recommended battery cable
|
14AWG
|
|
Quiescent current (full loaded)
|
< 0.4A
|
Packages
We always pack it with polyfoam first and then put it into a wooden case. Sometimes, in order to meet with customers or the safety requirement, we will make a pallet for the goods.
Company Introduction
Guangzhou Xingjin Fire Equipment Co., Ltd., surrounded by convenient transportation and beautiful environment, is located in Guangzhou, which plays an important role in communication between China and the world. We are a manufacturer, and we devote ourselves to the study and development of HFC-227ea (FM200) productions with our professional and mature team including the program design team, the skillful installation team, the quality detecting team and the after-sell service team. Nowadays, our popular fm200 products are widely used, such as the pipe network FM200 fire suppression system, the cabinet type FM200 fire suppression system, the automatic FM200 fire extinguisher
(ceiling mounted style), the fire detecting tube suppression system and automatic fire suppression tube. As a result of high-quality products and services as well as the good reputation, our company is well-received by the customers in China.
Part Cases Show
• In Sichuan province, the project cases are Bei Xin Run Yuan, Dong Lu Yi Jing, Yuewang Tower, Times Flower City, Shude Middle School, Wal - Mart near ASCB, New Hope Building, Xin Yi Zi Jin City, Tobacco Building, etc.
• In Guangdong province, the project cases are GAC Group, 10086 in Shenzhen, Haizhu Industrial and Commercial Bureau, Wanbao Air Controller, Yingfu Building in Shenzhen, Bank of Communication in Zhanjiang, Lijin Square in Zhanjiang, Zhanjiang Broadcasting and TV Station, etc.
• In Shandong province, the project cases are Lushang Office Building, Lushang Marketing Center, etc.
• Part in Sichuan
• Part in Guangdong
• Part in Foreign Country
Why Choose Us
• 5 years quality guarantee
• Xingjin is running in a high efficiency management system
• Advanced equipments & professional engineers to promise all products are quite satisfactory.
• We provide 8×6 hrs technical support and service.
After-Sale Service
• We have an efficient sales and after sales team to promise slove all client's question in time.
• We provide 8×6 hrs technical support and service.
FAQ
Q1: Are you a manufacturer or a trading company?
A1: We are a manufacturer.
Q2: Is OEM products available?
A2: Yes, we welcome your own design and drawing.
Q3: Where is your factory? Can I visit it?
A3: Our factory locates in Shilou, Panyu, Guangzhou, Guangdong, China.
Of course yes. We always welcome and wait for your visit.
Q4: How can I get to your factory?
A4: Because of the convenient transportation here, you can take a taxi or come here by subway. If you come here by subway, you need to take the line four and get off at Shiqi station. Then walk out the station for taking No. 126 bus and get off at Yuexi station.
Audited Supplier 
){kind=link}