Automatic CO2 Fire Extinguishing System
Description
Pressurized CO2 fire suppression system is a kind of intelligent automatic fire extinguishing equipment, which uses pressurized CO2 as extinguishing agent. Pressurized CO2 extinguishing agent won't cause damage for most things, because of its no residue and non-toxic after extinguishing. This agent still have many advantages: insulating, no water damage and good extinguishing effect.
Depend on different requirements of protection zone, pressurized CO2 fire suppression system can be designed as two kinds of the systems: unit system for single zone; combined distribution system for multiple zones. Adopts enclosed flooding extinguishing to realize the fire protection for single protected zone or multiple protected zones. Our system has three mode of starting: automatic, manual and machine emergency control. The system is advanced technology, high extinguishing efficiency and convenient maintenance.
An Automatic CO2 Fire Extinguishing System is a fire suppression system that uses carbon dioxide (CO2) as a suppressant agent to extinguish fires. It is commonly used in industrial settings and places where there are high-value equipment or materials because CO2 is a clean agent that leaves no residue after the discharge.
In an Automatic CO2 Fire Extinguishing System, a detection system is installed that can detect heat or smoke generated by a fire. When a fire is detected, the system will activate the discharge nozzles, which will release the CO2 gas into the affected area. The CO2 gas displaces the oxygen in the air reducing the oxygen level to below 15%, which makes it impossible for the fire to sustain itself, leading to a quick extinguishing process.
CO2 is an ideal suppressant agent for Class B and Class C fires because it does not conduct electricity, unlike water-based fire suppression systems, which can damage equipment and cause electrical hazards. Additionally, since CO2 is a clean agent, it is non-toxic to humans and does not cause any damage to equipment or materials in the protected area.
Automatic CO2 Fire Extinguishing Systems are highly efficient and reliable. These systems require thorough inspection and maintenance to ensure that the system is ready to work in case of fire incidents. They are recommended for professional installation by a qualified fire protection contractor to ensure that local fire propagation laws are respected and that the system is capable of extinguishing fires effectively within specific industries and applications.
Packaging & Shipping
Parameters
| No. |
Specification |
Technical Parameter |
| 1 |
Device Model |
QME70 |
| 2 |
Capacity |
70Ltr |
| 3 |
Filling Volume of Gas |
42kg |
| 4 |
Working Pressure |
5.7MPa |
| 5 |
Max Working Pressure |
12.4MPa |
| 6 |
Spraying Time |
≤60s |
| 7 |
Max Filling Rate |
0.6kg/L |
| 8 |
Power |
DC24V/1.6A |
| 9 |
Working Pressure of Releasing Device |
Container Valve: 19±0.95MPa;
Manifold: 15±0.75MPa |
| 10 |
Nitrogen Pressure of Driving |
6.0±1.0Mpa(20ºC) |
| 11 |
Condition of Reserving Room for Container |
Temperature: 0~50ºC |
Components
Pipe network type of CO2 automatic fire suppression system is mainly composed by three parts. Extinguishing devices and pipe fittings and electrical accessories.
Extinguishing devices are such things, like cylinder to fill and store CO2, frame and driving device(nitrogen cylinder) to trigger the storage cylinder to discharge agent and so on.
Pipe fittings are those conduits to connect extinguishing device and guide agent into protective zone, like high pressure galvanized steel pipe and flange and elbow and so on.
Electrical accessories are those things which are used to detect and monitor whole protective area and control whole system, also warn people to evacuate and prevent from fire expansion.
These integrated three parts will be efficient to detect and supervise and alarm and extinguish fire automatically.
Application
Library and archives room, electronic computer room, electrical substation, telecommunication room, hangar, garage, marine engine room, cargo, paint-spraying room, boiler room, control center, etc.
It is suitable for putting out all kinds of the fires of flammable liquid and solid matter; gas fire in which power can be cut off before extinguishing the fire.
Packages
We always pack it with polyfoam first and then put it into a wooden case. Sometimes, in order to meet with customers or the safety requirement, we will make a pallet for the goods.
Company Introduction
Guangzhou Xingjin Fire Equipment Co., Ltd., surrounded by convenient transportation and beautiful environment, is located in Guangzhou, which plays an important role in communication between China and the world. We are a manufacturer, and we devote ourselves to the study and development of HFC-227ea (FM200) productions with our professional and mature team including the program design team, the skillful installation team, the quality detecting team and the after-sell service team. Nowadays, our popular fm200 products are widely used, such as the pipe network FM200 fire suppression system, the cabinet type FM200 fire suppression system, the automatic FM200 fire extinguisher
(ceiling mounted style), the fire detecting tube suppression system and automatic fire suppression tube. As a result of high-quality products and services as well as the good reputation, our company is well-received by the customers in China.
Part Cases Show
• In Sichuan province, the project cases are Bei Xin Run Yuan, Dong Lu Yi Jing, Yuewang Tower, Times Flower City, Shude Middle School, Wal - Mart near ASCB, New Hope Building, Xin Yi Zi Jin City, Tobacco Building, etc.
• In Guangdong province, the project cases are GAC Group, 10086 in Shenzhen, Haizhu Industrial and Commercial Bureau, Wanbao Air Controller, Yingfu Building in Shenzhen, Bank of Communication in Zhanjiang, Lijin Square in Zhanjiang, Zhanjiang Broadcasting and TV Station, etc.
• In Shandong province, the project cases are Lushang Office Building, Lushang Marketing Center, etc.
• Part in Sichuan
• Part in Guangdong
• Part in Foreign Country
Why Choose Us
• 5 years quality guarantee
• Xingjin is running in a high efficiency management system
• Advanced equipments & professional engineers to promise all products are quite satisfactory.
• We provide 8×6 hrs technical support and service.
After-Sale Service
• We have an efficient sales and after sales team to promise slove all client's question in time.
• We provide 8×6 hrs technical support and service.
FAQ
Q1: Are you a manufacturer or a trading company?
A1: We are a manufacturer.
Q2: Is OEM products available?
A2: Yes, we welcome your own design and drawing.
Q3: Where is your factory? Can I visit it?
A3: Our factory locates in Shilou, Panyu, Guangzhou, Guangdong, China.
Of course yes. We always welcome and wait for your visit.
Q4: How can I get to your factory?
A4: Because of the convenient transportation here, you can take a taxi or come here by subway. If you come here by subway, you need to take the line four and get off at Shiqi station. Then walk out the station for taking No. 126 bus and get off at Yuexi station.
){kind=link}
){kind=link}